We have it sorted out

Get to know a new series of sorting grapples. Extendable with 3 different kinds of saw units makes you in charge of all sorting jobs and materials.

RSG Grapples

Discover all the benefits
  • Optional (dis)mountable saw unit
  • Optional HD fixed saw units
  • Optional additional rotation motors
  • Optional head angles
  • Special rake design with 7 teeth
  • Position, grab and hold!
  • Only quality materials

(Dis)mountable saw units with .404

HD saw units for 3/4″ and .404

Request prospect in other languages.

Get a quotation

More details are here

Dismountable sawunit

For .404 pitch

Dismountable sawunit

The dismountable sawunit is available for a .404 chain. The unit is (dis)mounted in seconds with the use of a quickcoupler system. This unit is perfect for debranching, shortening, cutting and felling (small) trees. Think nursery jobs near roads, railways or the more domestic jobs out there. If it’s going to get though, consider a fixed heavy duty sawunit.

Fixed HD Sawunit

For .404 and 3/4 pitch

Fixed HD Sawunit

These HD sawunit are designed for continues use as a grapple saw, in compare to the dismountable .404 sawunit, with more motor displacement and a heavy duty casing. All hydraulic drive parts are placed on the grapple side, which result in a low cutting edge, harvester heads alike.The units are available for a .404 and a 3/4″ pitch.

.

Designed for full control

Handle everything with 7 teeth

Designed for full control

The design with 7 grapple teeth makes you in control of all your sorting jobs and materials. The biggest model has a maximum opening diameter of 2.20 meters (7.72 ft.) and it closes to a minor 12 cm (0.39 ft.). It gives full ranging and positioning freedom, just grab and don’t let go. Big and long logs cannot tip-over inside the grapple. The teeth penetrate a pile of logs or shredder material with ease and hooked material within the bucket jaw(s) belongs to the past. The last bit of material can be raked together and you can still keep your shredder free from stones and dirt because these will easily fall through.These grapples enable you to work decisive and precise in demolition. The same goes with beam handling, fully embrace and hold on.

Powerfull structure

Quality combined with strenght

Powerfull structure

The oversized turntable endures high torsion. Completed with high torque orbit motors. All rotators are standard ready for additional rotation motors, to reach a total of 4 motors for undeniable strength. The rotation head is available for dangling or positioned mounting, for all quick couplers out there. Hoses and cylinders are protected inside the rotator head to eliminate damage and hose twisting. Hardened shafts and bushes with high strength steel guarantees extreme durability. The grapple is build out of high quality strength steel, we retain existing weight and add extra strength and durability. Line bored after welding for a perfect seamless fit.

Grapples standard and HD versions

Options

The standard versions of our grapples are extendable with extra rotation motors. The HD versions all have 4 HD motors and a HD turn table.

Designed to extend the use of primarily a sorting grapple to a grapple saw function and back. This unit can be (dis)mounted in minutes due to a quick coupler fastening. Suitable for incidental saw jobs and only available for 1600-7T.
These HD saw unit are designed for continues use as a grapple saw. With a motor displacements of 30 cc and a heavy duty saw casing. All hydraulic drive parts are placed on the grapple side, which results in a low cutting edge, harvester heads alike. These units have low speed but very high torque.
Choose between different head angles dependable on your job requirements. Available in 15° and 40°.
HD VERSIONS 1600-7T HD 1900-7T HD  2000-7T HD  2200-7T HD
10-16 17-21 21-26 28-40
Weight (kg) 660 1025 1230 1990
Operating pressure grab (bar) 300 350 350 350
Operating pressure rotate (bar) 140-210 190-210 190-210 190-210
Oil Grab (l/min) 40 100 120 170
Oil Rotate (l/min) 40 50 60 75
Width (mm) 760 820 920 1250
Height 1120 1190 1200 1450
Opening max (mm) 1520 2000 2060 2300
Opening min (mm) Ø50 Ø80 Ø110 Ø130
Closing force (kn) 27 35 52 73
Rotation motors 4  4  4  4
Grapple cylinder Single Single Double Double
STANDARD 1600-7T 1900-7T 2000-7T 2200-7T
Carrier (tons) 4-9 10-16 14-20 18-30
Weight (kg) 420 900 1100 1800
Operating pressure grab (bar) 300 350 350 350
Operating pressure rotate (bar) 140-210 190-210 190-210 190-210
Oil Grab (l/min) 40 100 120 170
Oil Rotate (l/min) 12 25 25 35
(A) Opening max (mm) 1600 2000 2000 2300
(B) Width (mm) 600 750 750 900
(C) Height (mm) 1110 1170 1190 1200
Diameter min (mm) Ø50 ø 80 ø 110 ø 130
Closing force (kn) 27 35 52 73
Rotation motors (sd / optional) 1 / 2 2/3/4 2/3/4 2/3/4
Grapple cylinder Single Single Double Double

Options

The standard versions of the 1900-7T, 2000-7T and 2200-7T grapple have 2 rotation motors, which gives a torque of 10200 Nm (10.2 kNm). These rotation heads are standard expandable for 1 or 2 additional standard motors, to reach a maximum torque of 20400 Nm (20.4 kNm).

The standard 1600-7T has 1 rotation motor and is ready for 1 additional motor.

Designed to extend the use of primarily a sorting grapple to a grapple saw function and back. This unit can be (dis)mounted in minutes due to a quick coupler fastening. Suitable for incidental saw jobs and only available for 1600-7T.
These HD saw unit are designed for continues use as a grapple saw. With a motor displacements of 30 cc and a heavy duty saw casing. All hydraulic drive parts are placed on the grapple side, which results in a low cutting edge, harvester heads alike. These units have low speed but very high torque.
Choose between different head angles dependable on your job requirements. Available in 15° and 40°.
Please note that above specifications are based on the use of the grapple without an installed sawunit. Check the data for the sawunit for the specific requirements.

Saw units

Fixed HD sawunit for 3/4″ pitch

 Technical Data  3/4″ HD
Weight (kg) 205 / 190
Pressure (bar) 250
Oil connection P -> T + leak
Oil flow (L/min) 160
Motor displacement (cc) 30
  • Bolt-on heavy duty casing in 33″ and 40″
  • Automatic saw bar return
  • Automatic chain lubrication
  • 3/4″ pitch chain
  • Semi-automatic chain tensioning
  • Independent chain oil tank
  • Variable saw bar lengths
  • Free adjustable saw bar speed
  • Free adjustable saw chain speed

(Dis)mountable sawunit for .404 pitch

 Technical Data  .404
Weight (kg) 160
Pressure (bar) 200-220
Oil connection P -> T + leak
Oil flow (L/min) 80-100
Motor displacement (cc) 11
  • Dismountable by quick coupler
  • Automatic saw bar return
  • Automatic chain lubrication
  • Saw bar 2.0 mm
  • .404 pitch chain
  • Automatic chain tensioning
  • Independent chain oil tank
  • Variable saw bar lengths
    78 cm, 91 cm or 101 cm (31″, 36″ or 40″)

Fixed HD sawunit for .404 pitch

 Technical Data  .404 HD
Weight (kg) 130
Pressure (bar) 250
Oil connection P -> T + leak
Oil flow (L/min) 120-160
Motor displacement (cc) 19
  • Bolt-on heavy duty casing
  • Automatic saw bar return
  • Automatic chain lubrication
  • Saw bar 2.0 mm
  • .404 pitch chain
  • Semi-automatic chain tensioning
  • Independent chain oil tank
  • Variable saw bar lengths: 91 cm or 101 cm (36″ or 40″)

  • Free adjustable saw bar speed
  • Free adjustable saw chain speed

Gallery