We have your work cut out

Get to know our treeshears. Four different models to meet your cutting needs.

Treeshear

Discover all the benefits
  • Four models for 2,5 – 35 T excavator
  • Cut until 450 mm (18″)
  • Optional high speed valve
  • Optional additional rotation motors
  • Optional 45° head angle
  • Standard step-valve
  • Protected cylinders and hoses in swivel
  • 360° rotation – Position, hold and cut!
  • Only quality materials

More details are here

Two step work process

Only cuts until it´s safely holded

Two step work process

This treeshear doesn´t cut until the tree or branch is secured, because of the step-valve. Hold the branch or tree before cutting and safely lay the felled tree afterwards.

Be in control of 360°

Position and rotate the shear in every possible way

Be in control of 360°

Our tree shears can be endlessly rotated. The 360° maneuvering possibility enables you to position the shear in every possible way. Especially beneficial while debranching and for safely laying the felled tree of branch after cutting.

Sheer force

Cuts powerfully branches, trees, bushes and brush

Sheer force

Regardless of whether you want to cut branches, bushes, brush or whole trees, our tree shear does the job. Cutting till a diameter of 450 mm (18″) and safely laying the cutted material afterwards.

Options

Get even more power

Options

All tree shears are standard equipped with a single rotation motor, good for 5000 Nm torque. The largest model is ready for an additional rotation motor to reach a total torque of 10.000 Nm. The high speed valve can be mounted to increase speed during closing. Optional hydraulically actuated locking pin.

Tree shear

Options

Add an additional rotation motor to our largest model 800S.
The turntable is standard locked by a manual locking pin. This locking pin prevents unwanted rotation of the turntable. This is increases safety, especially when working near to roads, powerlines or railways. Optional this locking pin can be hydraulically actuated.
The high speed valve can be mounted to increase speed during closing. Normally the hydraulic oil flow used for the rod side flows back into the tank. By installing this valve, the oil will be added to the oil flow for bottom side until the system reaches a certain pressure. Due to the extra oil, closing the grab goes significantly faster.
Choose between a rotator head angle of 0° or 45°.
250S 450S 800S 800S HD*
Carrier (tons) 2,-8 5-6,5 16-20 18-30
Weight (kg) 230 420 1300 1600
Pressure cut(bar) 250 250 320 320
Pressure rotate (bar) 170 170 170 170
Oil flow cut (l/min) 60 60 100 100
Oil flow rotate (l/min) 40 40 40 40
Opening max (mm) 250 400 800 800
Cuts (mm) 140 250 450 450
Cutting force (kN) 125 196 500 500
Rotation motors 1 1 1 or 2 1 or 2
Rotation 360° 360° 360° 360°
Measurements(mm) 1500x490x350 1700x720x500 2100x1000x1100 2100x1000x1100
Please note that shearing inflicts a very high local pressure. This can cause the sap to stowe with great force and may give damage to the remaining tree or fibres. For tree nursing and / or usage wood we recommended sawing.

Gallery